| Manufacturer's Description |
| The S182A is specifically designed for splicing fiber
of the same mode field diameter. The attenuation function
of the S182A can also be automated with optional PC Remote
control software. The unit's optimized design - with function
keys and LCD monitor located behind the splicing area
- provides you with uncluttered, efficient access to the
splicing area for maximum productivity. The S182A does
not touch the bare portion of the fiber, can accommodate
3 to 5 mm cleave lengths and when used with Fitel's High
Strength Splicing Kits provides a high strength splice
with an average tensile strength of 20N. The S182A can
also be used for non-high strength applications. |
| Specifications |
| Splicing Method | Profile Alignment System (PAS)
Core alignment |
| Applicable Fibers | SM, MM, DS, EDF (similar fiber pairs) |
| Average Loss | SM: 0.03dB
MM: 0.02dB
DS: 0.05dB |
| Splice Time | 20s (typical for SM; splice time varies depending on fiber type) |
| Coating Diameter | 250/400um coating |
| Cleave Length | 900um coating = 16mm or 11mm cleave lengths (not high strength) |
Attenuation | Up to 20dB for the S182A only |
| Splice Programs | 26 pre-programmed
6 customizable slots |
| Tensile Strength | Average of 300kpsi in a Fitel laboratory |
| Splice Memory | 400 splices |
| Protection Sleeve Shrink Time | 90 seconds |
| Heater Programs | 4 pre-programmed (for 20, 25, 40, 60mm sleeves)
4 customizable slots |
| Dimension/Weight | 180W x 260D x 160H (mm) / 7.5kg |
| Monitor | 5” color
264X magnification |
|
|
